#!/bin/bash

if [ "$1" = "complete" ]; then
  compgen -W "help status start stop restart reload check list_options" "$2"
  exit 0
fi

. `dirname $0`/functions

option	pidpath		standard_option	/var/run
option	sockpath	standard_option	/var/state
option	statedir	standard_option	/var/state/vrrp_state
option	config		standard_option	/var/state/vrrp.conf
option	group		multiple_option
option	notify		standard_option
option	only_vrrp	boolean_option
option	only_check	boolean_option
option	check_vrid	boolean_option
option	track_svc	multiple_option
option	track_mgt	multiple_option
option  track_inter_svc  standard_option 2
option  track_inter_mgt  standard_option 2
option  track_weight_if  standard_option -6
option  track_weight_mgt standard_option 2
option  track_weight_svc standard_option 8
option  track_rise_svc   standard_option 2
option  track_rise_mgt   standard_option 2
option  track_fall_svc   standard_option 2
option  track_fall_mgt   standard_option 2

option	procname	reserved_option	keepalived
option	bin		reserved_option	/usr/sbin/keepalived
option	pidfile		reserved_option
option	cmdline		reserved_option

# Takes some parameters from the network interface sections :
#   vrrp [inst <name>] id        <id>
#   vrrp [inst <name>] prio      <prio>
#   vrrp [inst <name>] address   <addr>
#   vrrp [inst <name>] auth_type PASS
#   vrrp [inst <name>] auth_password | vrrp password
#   vrrp [inst <name>] garp      <interval>
#   vrrp [inst <name>] no-address
#   vrrp [inst <name>] use-vmac

# set the correct pidfile
# keepalived uses several pidfile with different names. The best to do is to
# cure the default name to check that the user doesn't play with it.
function fct_begin_section {
    pidfile=
}

function fct_end_section {
    local svcname=$1
    local instname=$2
    local pidfilecheck
    local pidfilevrrp

    if [ -n "$pidfile" ]; then
	echo "[$1.$2] WARNING! ignoring pidfile from config.rc. Use 'pidpath' instead."
    fi

    pidfile=${opt_pidpath}/keepalived_$svcname${instname:+_${instname}}.pid

    if [ -n "${opt_only_vrrp}" -o -z "${opt_only_check}" ] ; then
    	pidfilevrrp=${pidfile%.pid}_v.pid
    fi

    if [ -z "${opt_only_vrrp}" -o -n "${opt_only_check}" ] ; then
    	pidfilecheck=${pidfile%.pid}_c.pid
    fi

    cmdline="$bin ${opt_only_vrrp:+--vrrp} ${opt_only_check:+--check} -f $opt_config -p $pidfile ${pidfilevrrp:+-r $pidfilevrrp} ${pidfilecheck:+-c $pidfilecheck}"
}

# reinitialize the cache before starting the daemon
function fct_pre_start {
    local svcname=$1
    local instname=$2
    local -a physint
    local tmp nbchk

    rm -f $opt_config >/dev/null 2>&1
    echo "# automatically generated file from $0" > $opt_config
    
    if [ ${#opt_group[*]} = 0 ]; then
	echo "  --> VRRP: no interface in group. Aborting."
	return 1
    fi

    # consitute a list of physical interfaces in the group delimited by pipes
    # then remove the pipes once data are de-duplicated.
    physint=( )
    opt_group=( ${opt_group[*]} )
    for tmp in ${opt_group[*]%%.[0-9]*}; do
	if [ -z "${physint[*]}" -o "${physint[*]//|$tmp|}" = "${physint[*]}" ]; then
	    physint=( "${physint[@]}" "|$tmp|" )
	fi
    done
    physint=( "${physint[@]//|}" )

    {

	nbchk=0
	for tmp in ${opt_track_mgt[@]}; do
	    echo "vrrp_script chk_$nbchk {"
	    echo "	script \"killall -0 $tmp\""
	    echo "	interval ${opt_track_inter_mgt:-2}"
	    echo "	weight ${opt_track_weight_mgt:-2}"
	    echo "	fall   ${opt_track_fall_mgt:-2}"
	    echo "	rise   ${opt_track_rise_mgt:-2}"
	    echo "}"
	    (( nbchk++ ))
	done

	for tmp in ${opt_track_svc[@]}; do
	    echo "vrrp_script chk_$nbchk {"
	    echo "	script \"killall -0 $tmp\""
	    echo "	interval ${opt_track_inter_svc:-2}"
	    echo "	weight ${opt_track_weight_svc:-8}"
	    echo "	fall   ${opt_track_fall_svc:-2}"
	    echo "	rise   ${opt_track_rise_svc:-2}"
	    echo "}"
	    (( nbchk++ ))
	done

	/sbin/init.d/network --filter_option vrrp list_options | awk \
	    -v physint_str="${physint[*]}" -v group_str="${opt_group[*]}" \
	    -v track_w_if="$opt_track_weight_if" -v nbchk="$nbchk" \
	    -v notify="$opt_notify"  \
	'
	# my_strtonum --- convert string to number (from gawk manual)
	function my_strtonum(str,        ret, n, i, k, c)
	{
		if (str ~ /^0[0-7]*$/) {
			# octal
			n = length(str)
			ret = 0
			for (i = 1; i <= n; i++) {
				c = substr(str, i, 1)
				# index() returns 0 if c not in string,
				# includes c == "0"
				k = index("1234567", c)

				ret = ret * 8 + k
			}
		} else if (str ~ /^0[xX][[:xdigit:]]+$/) {
			# hexadecimal
			str = substr(str, 3)    # lop off leading 0x
			n = length(str)
			ret = 0
			for (i = 1; i <= n; i++) {
				c = substr(str, i, 1)
				c = tolower(c)
				# index() returns 0 if c not in string,
				# includes c == "0"
				k = index("123456789abcdef", c)

				ret = ret * 16 + k
			}
		} else if (str ~ \
		           /^[-+]?([0-9]+([.][0-9]*([Ee][0-9]+)?)?|([.][0-9]+([Ee][-+]?[0-9]+)?))$/) {
			# decimal number, possibly floating point
			ret = str + 0
		} else
			ret = "NOT-A-NUMBER"

		return ret
	}

	BEGIN {
	    split(physint_str, physint);
	    split(group_str, group);
	    for (i in group)
		known_dev[group[i]]=group[i];

	    if (track_w_if == "")
		track_w_if = -6;
	}

	{
	    if ($1 !~ "^network\\.")
		next;
	    if ($2 != "vrrp")
		next;
	    eth = substr($1, 9);
	    if (!(eth in known_dev))
		next;
	    inst = eth;
	    arg = 3;
	    if ($arg == "")
		next;

	    if ($arg ~ "^inst") {
		inst = inst "|" $(arg+1);
		arg += 2;
	    }

	    vrrp_index[inst] = inst;
	    vrrp_eth[inst] = eth;
	    if ($arg == "id") {
		if (vrrp_id[inst])
		    print "  --> Warning: VRRP id", $(arg+1), "already specified as", vrrp_id[inst], "for network interface", eth > "/dev/stderr"
		vrrp_id[inst] = $(arg+1);
	    }
	    else if ($arg ~ "^prio") {
		if (vrrp_prio[inst])
		    print "  --> Warning: VRRP prio", $(arg+1), "already specified as", vrrp_prio[inst], "for network interface", eth > "/dev/stderr"
		vrrp_prio[inst] = $(arg+1);
	    }
	    else if ($arg ~ "^addr") {
		tmp_addr="";
		for ( i = arg+1 ; i <= NF ; i++ ) {
			tmp_addr = (tmp_addr != "" ? tmp_addr " " : "") $i;
		} 
		vrrp_addr[inst] = (vrrp_addr[inst] != "" ? vrrp_addr[inst] "\n" : "") tmp_addr;
	    } 
	    else if ($arg ~ "^auth_t")
		vrrp_auth[inst] = $(arg+1);
	    else if ($arg ~ "^auth_p" || $arg ~ "^pass")
		vrrp_pass[inst] = $(arg+1);
	    else if ($arg ~ "^garp")
		vrrp_garp[inst] = $(arg+1);
	    else if ($arg == "no-address")
		vrrp_no_address[inst] = 1;
	    else if ($arg == "use-vmac")
		vrrp_use_vmac[inst] = 1;
	    else
		print "  --> ignoring unknown VRRP option:", $arg, "in network interface", eth > "/dev/stderr"
	}

	END {
	    for (vrrp in vrrp_index) {
		v = vrrp_index[vrrp];
		if (vrrp_id[v] == "") {
		    print "  --> ignoring VRRP instance", v, " : missing VRRP id option." > "/dev/stderr";
		    continue;
		}
		if (my_strtonum(vrrp_id[v]) < 1 || my_strtonum(vrrp_id[v]) > 255) {
		    print "  --> ignoring VRRP instance", v, " : VRRP id", vrrp_id[v], "out of range (1-255)." > "/dev/stderr";
		    continue;
		}

		if (vrrp_prio[v] != "" && (my_strtonum(vrrp_prio[v]) < 0 || my_strtonum(vrrp_prio[v]) > 255)) {
		    print "  --> ignoring VRRP instance", v, " : VRRP prio", vrrp_prio[v], "out of range (0-255)." > "/dev/stderr";
		    continue;
		}

		print "vrrp_instance", v, "{";
		print "\tinterface", vrrp_eth[v];
		print "\tvirtual_router_id", vrrp_id[v];
		print "\tdont_check_address";
		if (vrrp_use_vmac[v] != "")
		    print "\tuse_vmac";

		if (vrrp_prio[v] != "")
		    print "\tpriority", vrrp_prio[v];

		if (vrrp_garp[v] != "")
		    print "\tgarp_master_delay", vrrp_garp[v];
		else
		    print "\tgarp_master_delay 60";

		if (notify != "")
		    printf ("\tnotify \"%s\"\n", notify);

		n = split(vrrp_addr[v], addr, "\n");
		if (!vrrp_no_address[v] && n > 255) {
		    print "# ==> Error in VRRP instance ",v,": more than 255 IP addresses. You need to set \"vrrp no-address\". Aborting."
		}
		if (n) {
		    if (vrrp_no_address[v] != "")
			print "\tvirtual_ipaddress_excluded {";
		    else
			print "\tvirtual_ipaddress {";
		    for (i = 1; i <= n; i++)
			print "\t\t", addr[i];
		    print "\t}";
		}

		split(vrrp_eth[v], physdev, ".");
		print "\ttrack_interface {";
		for (i in physint) {
		    dev = physint[i];
		    if (dev == physdev[1])
			print "\t\t", dev;
		    else
			print "\t\t", dev, "weight", track_w_if;
		}
		print "\t}";

		if (nbchk > 0) {
		    print "\ttrack_script {";
		    for (i = 0; i < nbchk; i++)
			printf("\t\tchk_%d\n", i);
		    print "\t}";
		}

		if (vrrp_pass[v] != "") {
		    print "\tauthentication {";
		    print "\t\tauth_type", vrrp_auth[v]?vrrp_auth[v]:"PASS";
		    print "\t\tauth_pass", vrrp_pass[v];
		    print "\t}";
		}

		print "}"; print "";
	    }
	}
	'
    } >> $opt_config
    if [ $? != 0 ]; then
       echo "# ==> Fatal error while generating VRRP configuration. Aborting." >&2
       return 1
    fi

    grep "Error in VRRP instance" $opt_config >&2 && return 1

    if [ "$opt_check_vrid" = 1 -a "$(grep virtual_router_id $opt_config|wc -l)" != \
	"$(grep virtual_router_id $opt_config|sort -u|wc -l)" ]; then
	echo "  --> VRRP: at least two interfaces share a same 'vrrp id'. Aborting."
	return 1
    fi

    # now we will reset the interfaces states so that vrrp_notify knows
    # what it must track
    if [ -n "$opt_statedir" ]; then
	[ -e "$opt_statedir" ] && rm -rf "$opt_statedir"
	mkdir -p "$opt_statedir"

	for inst in ${opt_group[*]}; do
	    echo "INIT" > "$opt_statedir/$inst"
	done
    fi
    
    return 0
}

function report_individual_status {
    local state int inst

    [ -n "$opt_statedir" ] || return 0
    if ! [ -e "$opt_statedir" ]; then
       echo "State dir $opt_statedir does not exist."
       return 1
    fi

    echo "Interfaces states :"
    for int in ${opt_group[*]}; do
       inst=""
       for inst in $(echo $opt_statedir/$int\|*); do
          state="$(cat $inst 2>/dev/null) "
          [ -n "$state" ] && echo "  ${inst##*/} : $state"
       done
       if [ -z "$inst" ]; then
          state="$(cat $opt_statedir/$int 2>/dev/null) "
          [ -n "$state" ] && echo "  $int : $state"
       fi
    done
    state="$(cat $opt_statedir/.global 2>/dev/null) "
    [ -n "$state" ] && echo "  global : $state"
    echo
    return 0
}

function do_status {
    local svcname=$1
    local instname=$2
    local pids
    local real_pids
    local pidfile=${opt_pidpath}/keepalived_$svcname${instname:+_${instname}}.pid
    local pidfilevrrp=${pidfile%.pid}_v.pid
    local pidfilecheck=${pidfile%.pid}_c.pid

    if [ -s "$pidfile" -o -s "$pidfilevrrp" -o -s "$pidfilecheck" ]; then
        pids=$(cat "$pidfile" "$pidfilevrrp" "$pidfilecheck" 2>/dev/null)
        real_pids=$(ps ho pid $pids)
        if [ -n "$real_pids" ]; then
          echo "VRRP running using these pids : $(echo $real_pids)"
          report_individual_status
          return 0
        fi
        echo "Stale PID files are present."
    fi

    svc_pidof -o $$ -p "" $procname > /dev/null 2>&1 ; pids=$REPLY
    if [ -n "$pids" ]; then
        echo "The PID files indicate that the VRRP daemon is not running."
        echo "However, you should check those pids : $(echo $pids)"
        report_individual_status
        return 1
    else        
        echo "VRRP daemon not running."
        return 1
    fi
}

function do_stop {
    local svcname=$1
    local instname=$2
    local pidfile=${opt_pidpath}/keepalived_$svcname${instname:+_${instname}}.pid
    local pidfilevrrp=${pidfile%.pid}_v.pid
    local pidfilecheck=${pidfile%.pid}_c.pid
    local ret

    ret=0
    for i in "$pidfile" "$pidfilevrrp" "$pidfilecheck"; do
        if [ -s "$i" ] ; then
		do_stop_with_pidfile "$i" $procname $instname
		[ $? != 0 ] && ret=1
        fi
    done

    return $ret
}

function do_reload {
    local svcname=$1
    local instname=$2
    local pidfile=${opt_pidpath}/keepalived_$svcname${instname:+_${instname}}.pid
    local pids
    local real_pids

    if [ -s "$pidfile" ]; then
        pids=$(cat "$pidfile" 2>/dev/null)
        real_pids=$(ps ho pid $pids 2>/dev/null)
    fi

    if [ -z "$real_pids" -o ! -e "$opt_config" ]; then
        echo "VRRP not running, restarting"
        do_restart "$1" "$2"
        return $?
     fi

     echo "Updating VRRP configuration."

     rm -f "$opt_config.bak" >/dev/null 2>&1
     cp "$opt_config" "$opt_config.bak" >/dev/null 2>&1
     if ! fct_pre_start "$1" "$2"; then
         echo "Failed to build a new config, reloading backup"
         mv "$opt_config.bak" "$opt_config" >/dev/null 2>&1
         kill -HUP $real_pids
         return 1
     fi
     rm -f "$opt_config.bak" >/dev/null 2>&1
     kill -HUP $real_pids
     return $?
}

load_config